1.There is a metal detecting device in the layer feeding part to protect the machine.

2.Licker-in overlow speed protection,so as to prevent fiber jams.

3.Below the licker-in,there fixed with mote knife and pre-carding segment,which can help remove impurities and short fibers,and reduce the carding loads.

4.Equipped with a broken slivers stop motion for sliver delivery part .

5.The direction of the revolving flats and the cylinder is opposite;stationary flats and web purifiers are fixed in the front and back of the cylinder to enhance the carding and cleaning efficiency.

6.The cylinder is of integrated steel plate structure,to improve the stability,the rigidity and the precision,which are light and handy,with their surface bright and clean,with less power loss and good impurities extraction effect.

7.Adopt aluminium sections for the revolving flats,stationary flats and web purifiers,which are light and handy,with their surface bright and clean,with less power loss and good impurities extraction efffect.

8.New type three-roller stripping mechanism,advantageous to the stripping and transferring of webs.

9.Intergrated structure of reversing type large calender roller by pneumatic control and the web condenser ,advantageous to high-speed delivery.

10.Adopt motor transmission and inverter control for the feeding,the cylinder and the doffer,which are convenient

11.Adopt flat belts and synchronized toothed belts for the whole machine transmission,ensuring stable running and low noise.

12.Positive multi-points continuous suction for the whole machine.

13.For the electrical control system,computer communication and digital synchronous

14.With long-term,short-term mixed loops autoleveller,to further improve the evenness and the stability of slivers.

15.Adopt totally-enclosed protective cover,in good order and good-looking.

1.Applicable range:fiber length: 22-76mm,100%cotton,man-made fibers or blendings.

2.Feeding weight: 350-1000g/m.

3.Working width: 1000mm.

4.Total draft multiple: 70-130.

5.Sliver grams: 3.5-13g/m.

6.Max.delivery speed: 240m/min.

7.Actual max.production: 150kg/h.

8.Licker-in working dia: 250mm.

9.Cylinder working dia: 1290mm.

10.Cylinder working speed: 360-500rpm.

11.Doffer working dia: 706mm.

12.Doffer working speed: 10-65rpm.

13.Revolving flats No.(working/total): 30/82.

14.Flats speed: 133-278mm/min.

15.Stationary flats No: front 4 rear 7.

16.Web purifier: front 1 rear 2.

17.Coiler type: manual or revolving type 3-position auto can changer.

18.Sliver can specification: 600*900mm;600*1100mm.

19.Continuous air suction amount per set: 3500-4000m3/h.

20.Total installed power: 10.16kw.

21.Overall size(L*W*H): 5600*2770*3170(excluded auto-feeding machine).